webdevqa.jp.net

Debianxfceでの新しいデュアルモニターのセットアップ

これは別のスタックサイトに属していると確信していますが、どちらかはわかりません。

いずれにせよ、私はしばらくの間デュアルモニターでArchを使用していましたが、最終的にはシステムのアップグレードによってビデオドライバーが台無しになり、モニターが1つしかありませんでした。しばらく対処しましたが、起動が止まりました。 Archは大好きですが、時間がありません。

XfceでDebianに切り替えましたが、2番目のモニターが認識されないようです。誰かが私を正しいスタックに向けることができますか、それとも単に助けを与えることができますか?

[email protected]:/etc/X11$ lspci
00:00.0 RAM memory: NVIDIA Corporation MCP61 Memory Controller (rev a1)
00:01.0 ISA bridge: NVIDIA Corporation MCP61 LPC Bridge (rev a2)
00:01.1 SMBus: NVIDIA Corporation MCP61 SMBus (rev a2)
00:01.2 RAM memory: NVIDIA Corporation MCP61 Memory Controller (rev a2)
00:02.0 USB controller: NVIDIA Corporation MCP61 USB 1.1 Controller (rev a2)
00:02.1 USB controller: NVIDIA Corporation MCP61 USB 2.0 Controller (rev a2)
00:04.0 PCI bridge: NVIDIA Corporation MCP61 PCI bridge (rev a1)
00:05.0 Audio device: NVIDIA Corporation MCP61 High Definition Audio (rev a2)
00:06.0 IDE interface: NVIDIA Corporation MCP61 IDE (rev a2)
00:08.0 IDE interface: NVIDIA Corporation MCP61 SATA Controller (rev a2)
00:08.1 IDE interface: NVIDIA Corporation MCP61 SATA Controller (rev a2)
00:09.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2)
00:0b.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2)
00:0c.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2)
00:0d.0 VGA compatible controller: NVIDIA Corporation C61 [GeForce 6150SE nForce 430] (rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:06.0 Communication controller: LSI Corporation Lucent V.92 Data/Fax Modem
01:09.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)
02:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Cedar PRO [Radeon HD 5450/6350]
02:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Cedar HDMI Audio [Radeon HD 5400/6300 Series]
03:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8039 PCI-E Fast Ethernet Controller (rev 14)
[email protected]:/etc/X11$ 

[email protected]:/etc/X11$ xrandr
Screen 0: minimum 320 x 200, current 1280 x 1024, maximum 4096 x 4096
VGA-1 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 375mm x 301mm
   1280x1024      60.0*+   75.0  
   1280x960       75.0     70.0     60.0  
   1152x864       75.0     70.0     60.0  
   1024x768       75.1     70.1     60.0  
   832x624        74.6  
   800x600        72.2     75.0     60.3     56.2  
   640x480        72.8     75.0     66.7     60.0  
   720x400        70.1  

。 $ X-configureの後80億台のモニターが追加された理由がわかりません...

[email protected]:/etc/X11$ cat /etc/X11/
app-defaults/            X                        Xreset                   Xsession.d/              
default-display-manager  xinit/                   Xreset.d/                Xsession.options         
fonts/                   xkb/                     Xresources/              XvMCConfig               
rgb.txt                  xorg.conf.new            Xsession                 Xwrapper.config          
[email protected]:/etc/X11$ cat /etc/X11/xorg.conf.new 
Section "ServerLayout"
    Identifier     "X.org Configured"
    Screen      0  "Screen0" 0 0
    Screen      1  "Screen1" RightOf "Screen0"
    Screen      2  "Screen2" RightOf "Screen1"
    Screen      3  "Screen3" RightOf "Screen2"
    Screen      4  "Screen4" RightOf "Screen3"
    Screen      5  "Screen5" RightOf "Screen4"
    InputDevice    "Mouse0" "CorePointer"
    InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
    ModulePath   "/usr/lib/xorg/modules"
    FontPath     "/usr/share/fonts/X11/misc"
    FontPath     "/usr/share/fonts/X11/cyrillic"
    FontPath     "/usr/share/fonts/X11/100dpi/:unscaled"
    FontPath     "/usr/share/fonts/X11/75dpi/:unscaled"
    FontPath     "/usr/share/fonts/X11/Type1"
    FontPath     "/usr/share/fonts/X11/100dpi"
    FontPath     "/usr/share/fonts/X11/75dpi"
    FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
    FontPath     "built-ins"
EndSection

Section "Module"
    Load  "extmod"
    Load  "dri2"
    Load  "glx"
    Load  "record"
    Load  "dbe"
    Load  "dri"
EndSection

Section "InputDevice"
    Identifier  "Keyboard0"
    Driver      "kbd"
EndSection

Section "InputDevice"
    Identifier  "Mouse0"
    Driver      "mouse"
    Option      "Protocol" "auto"
    Option      "Device" "/dev/input/mice"
    Option      "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
    Identifier   "Monitor0"
    VendorName   "Monitor Vendor"
    ModelName    "Monitor Model"
EndSection

Section "Monitor"
    Identifier   "Monitor1"
    VendorName   "Monitor Vendor"
    ModelName    "Monitor Model"
EndSection

Section "Monitor"
    Identifier   "Monitor2"
    VendorName   "Monitor Vendor"
    ModelName    "Monitor Model"
EndSection

Section "Monitor"
    Identifier   "Monitor3"
    VendorName   "Monitor Vendor"
    ModelName    "Monitor Model"
EndSection

Section "Monitor"
    Identifier   "Monitor4"
    VendorName   "Monitor Vendor"
    ModelName    "Monitor Model"
EndSection

Section "Monitor"
    Identifier   "Monitor5"
    VendorName   "Monitor Vendor"
    ModelName    "Monitor Model"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
        ### <percent>: "<f>%"
        ### [arg]: arg optional
        #Option     "SWcursor"              # [<bool>]
        #Option     "HWcursor"              # [<bool>]
        #Option     "NoAccel"               # [<bool>]
        #Option     "ShadowFB"              # [<bool>]
        #Option     "VideoKey"              # <i>
        #Option     "WrappedFB"             # [<bool>]
        #Option     "GLXVBlank"             # [<bool>]
        #Option     "ZaphodHeads"           # <str>
        #Option     "PageFlip"              # [<bool>]
        #Option     "SwapLimit"             # <i>
        #Option     "AsyncUTSDFS"           # [<bool>]
    Identifier  "Card0"
    Driver      "nouveau"
    BusID       "PCI:0:13:0"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
        ### <percent>: "<f>%"
        ### [arg]: arg optional
        #Option     "NoAccel"               # [<bool>]
        #Option     "SWcursor"              # [<bool>]
        #Option     "Dac6Bit"               # [<bool>]
        #Option     "Dac8Bit"               # [<bool>]
        #Option     "BusType"               # [<str>]
        #Option     "CPPIOMode"             # [<bool>]
        #Option     "CPusecTimeout"         # <i>
        #Option     "AGPMode"               # <i>
        #Option     "AGPFastWrite"          # [<bool>]
        #Option     "AGPSize"               # <i>
        #Option     "GARTSize"              # <i>
        #Option     "RingSize"              # <i>
        #Option     "BufferSize"            # <i>
        #Option     "EnableDepthMoves"      # [<bool>]
        #Option     "EnablePageFlip"        # [<bool>]
        #Option     "NoBackBuffer"          # [<bool>]
        #Option     "DMAForXv"              # [<bool>]
        #Option     "FBTexPercent"          # <i>
        #Option     "DepthBits"             # <i>
        #Option     "PCIAPERSize"           # <i>
        #Option     "AccelDFS"              # [<bool>]
        #Option     "IgnoreEDID"            # [<bool>]
        #Option     "CustomEDID"            # [<str>]
        #Option     "DisplayPriority"       # [<str>]
        #Option     "PanelSize"             # [<str>]
        #Option     "ForceMinDotClock"      # <freq>
        #Option     "ColorTiling"           # [<bool>]
        #Option     "VideoKey"              # <i>
        #Option     "RageTheatreCrystal"    # <i>
        #Option     "RageTheatreTunerPort"  # <i>
        #Option     "RageTheatreCompositePort"  # <i>
        #Option     "RageTheatreSVideoPort"     # <i>
        #Option     "TunerType"             # <i>
        #Option     "RageTheatreMicrocPath"     # <str>
        #Option     "RageTheatreMicrocType"     # <str>
        #Option     "ScalerWidth"           # <i>
        #Option     "RenderAccel"           # [<bool>]
        #Option     "SubPixelOrder"         # [<str>]
        #Option     "ClockGating"           # [<bool>]
        #Option     "VGAAccess"             # [<bool>]
        #Option     "ReverseDDC"            # [<bool>]
        #Option     "LVDSProbePLL"          # [<bool>]
        #Option     "AccelMethod"           # <str>
        #Option     "DRI"                   # [<bool>]
        #Option     "ConnectorTable"        # <str>
        #Option     "DefaultConnectorTable"     # [<bool>]
        #Option     "DefaultTMDSPLL"        # [<bool>]
        #Option     "TVDACLoadDetect"       # [<bool>]
        #Option     "ForceTVOut"            # [<bool>]
        #Option     "TVStandard"            # <str>
        #Option     "IgnoreLidStatus"       # [<bool>]
        #Option     "DefaultTVDACAdj"       # [<bool>]
        #Option     "Int10"                 # [<bool>]
        #Option     "EXAVSync"              # [<bool>]
        #Option     "ATOMTVOut"             # [<bool>]
        #Option     "R4xxATOM"              # [<bool>]
        #Option     "ForceLowPowerMode"     # [<bool>]
        #Option     "DynamicPM"             # [<bool>]
        #Option     "NewPLL"                # [<bool>]
        #Option     "ZaphodHeads"           # <str>
    Identifier  "Card1"
    Driver      "radeon"
    BusID       "PCI:2:0:0"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
        ### <percent>: "<f>%"
        ### [arg]: arg optional
        #Option     "ShadowFB"              # [<bool>]
        #Option     "Rotate"                # <str>
        #Option     "fbdev"                 # <str>
        #Option     "debug"                 # [<bool>]
    Identifier  "Card2"
    Driver      "fbdev"
    BusID       "PCI:0:13:0"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
        ### <percent>: "<f>%"
        ### [arg]: arg optional
        #Option     "ShadowFB"              # [<bool>]
        #Option     "Rotate"                # <str>
        #Option     "fbdev"                 # <str>
        #Option     "debug"                 # [<bool>]
    Identifier  "Card3"
    Driver      "fbdev"
    BusID       "PCI:2:0:0"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
        ### <percent>: "<f>%"
        ### [arg]: arg optional
        #Option     "ShadowFB"              # [<bool>]
        #Option     "DefaultRefresh"        # [<bool>]
        #Option     "ModeSetClearScreen"    # [<bool>]
    Identifier  "Card4"
    Driver      "vesa"
    BusID       "PCI:0:13:0"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
        ### <percent>: "<f>%"
        ### [arg]: arg optional
        #Option     "ShadowFB"              # [<bool>]
        #Option     "DefaultRefresh"        # [<bool>]
        #Option     "ModeSetClearScreen"    # [<bool>]
    Identifier  "Card5"
    Driver      "vesa"
    BusID       "PCI:2:0:0"
EndSection

Section "Screen"
    Identifier "Screen0"
    Device     "Card0"
    Monitor    "Monitor0"
    SubSection "Display"
        Viewport   0 0
        Depth     1
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     4
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     8
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     15
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     16
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     24
    EndSubSection
EndSection

Section "Screen"
    Identifier "Screen1"
    Device     "Card1"
    Monitor    "Monitor1"
    SubSection "Display"
        Viewport   0 0
        Depth     1
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     4
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     8
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     15
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     16
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     24
    EndSubSection
EndSection

Section "Screen"
    Identifier "Screen2"
    Device     "Card2"
    Monitor    "Monitor2"
    SubSection "Display"
        Viewport   0 0
        Depth     1
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     4
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     8
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     15
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     16
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     24
    EndSubSection
EndSection

Section "Screen"
    Identifier "Screen3"
    Device     "Card3"
    Monitor    "Monitor3"
    SubSection "Display"
        Viewport   0 0
        Depth     1
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     4
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     8
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     15
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     16
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     24
    EndSubSection
EndSection

Section "Screen"
    Identifier "Screen4"
    Device     "Card4"
    Monitor    "Monitor4"
    SubSection "Display"
        Viewport   0 0
        Depth     1
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     4
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     8
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     15
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     16
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     24
    EndSubSection
EndSection

Section "Screen"
    Identifier "Screen5"
    Device     "Card5"
    Monitor    "Monitor5"
    SubSection "Display"
        Viewport   0 0
        Depth     1
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     4
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     8
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     15
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     16
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     24
    EndSubSection
EndSection

週末の作業の後、私はこれをArchで動作させることができましたが、Debianが少し簡単になることを望んでいました。

これ以上出力を供給できます。 Archを最後にロードしたとき、CLIには2つのモニターが表示されましたが、Xfceには表示されませんでした。

どうもありがとう!私は友人に新しい簡単なビジネスウェブサイトを提供してから約1日でした(友人の価格-無料:))、彼も感謝します。

Gnomeが魔法のようにすべてを解決すると誰かに言われたら、再インストールできますが、xfceが大好きになりました。

ありがとう!

編集:切断は、lspciが追加のビデオカードを認識しているのに対し、xandrは認識していないことだと思います...

編集:lspci -v

[email protected]:/etc/X11$ Sudo lspci -v
[Sudo] password for parris: 
00:00.0 RAM memory: NVIDIA Corporation MCP61 Memory Controller (rev a1)
    Subsystem: Elitegroup Computer Systems Device 2601
    Flags: bus master, 66MHz, fast devsel, latency 0
    Capabilities: [44] HyperTransport: Slave or Primary Interface
    Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed-

00:01.0 ISA bridge: NVIDIA Corporation MCP61 LPC Bridge (rev a2)
    Subsystem: Elitegroup Computer Systems Device 2601
    Flags: bus master, 66MHz, fast devsel, latency 0

00:01.1 SMBus: NVIDIA Corporation MCP61 SMBus (rev a2)
    Subsystem: Elitegroup Computer Systems Device 2601
    Flags: 66MHz, fast devsel, IRQ 5
    I/O ports at fc00 [size=64]
    I/O ports at 1c00 [size=64]
    I/O ports at f400 [size=64]
    Capabilities: [44] Power Management version 2
    Kernel driver in use: nForce2_smbus

00:01.2 RAM memory: NVIDIA Corporation MCP61 Memory Controller (rev a2)
    Subsystem: Elitegroup Computer Systems Device 2601
    Flags: 66MHz, fast devsel

00:02.0 USB controller: NVIDIA Corporation MCP61 USB 1.1 Controller (rev a2) (prog-if 10 [OHCI])
    Subsystem: Elitegroup Computer Systems Device 2601
    Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23
    Memory at fe02f000 (32-bit, non-prefetchable) [size=4K]
    Capabilities: [44] Power Management version 2
    Kernel driver in use: ohci_hcd

00:02.1 USB controller: NVIDIA Corporation MCP61 USB 2.0 Controller (rev a2) (prog-if 20 [EHCI])
    Subsystem: Elitegroup Computer Systems Device 2601
    Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
    Memory at fe02e000 (32-bit, non-prefetchable) [size=256]
    Capabilities: [44] Debug port: BAR=1 offset=0098
    Capabilities: [80] Power Management version 2
    Kernel driver in use: ehci_hcd

00:04.0 PCI bridge: NVIDIA Corporation MCP61 PCI bridge (rev a1) (prog-if 01 [Subtractive decode])
    Flags: bus master, 66MHz, fast devsel, latency 0
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
    I/O behind bridge: 0000b000-0000bfff
    Memory behind bridge: fdf00000-fdffffff
    Prefetchable memory behind bridge: fd900000-fd9fffff
    Capabilities: [b8] Subsystem: NVIDIA Corporation Device cb84
    Capabilities: [8c] HyperTransport: MSI Mapping Enable- Fixed-

00:05.0 Audio device: NVIDIA Corporation MCP61 High Definition Audio (rev a2)
    Subsystem: Elitegroup Computer Systems Device a88d
    Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23
    Memory at fe028000 (32-bit, non-prefetchable) [size=16K]
    Capabilities: [44] Power Management version 2
    Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
    Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+
    Kernel driver in use: snd_hda_intel

00:06.0 IDE interface: NVIDIA Corporation MCP61 IDE (rev a2) (prog-if 8a [Master SecP PriP])
    Subsystem: Elitegroup Computer Systems Device 2601
    Flags: bus master, 66MHz, fast devsel, latency 0
    [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
    [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
    [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
    [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
    I/O ports at f000 [size=16]
    Capabilities: [44] Power Management version 2
    Kernel driver in use: pata_AMD

00:08.0 IDE interface: NVIDIA Corporation MCP61 SATA Controller (rev a2) (prog-if 85 [Master SecO PriO])
    Subsystem: Elitegroup Computer Systems Device 2601
    Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21
    I/O ports at 09f0 [size=8]
    I/O ports at 0bf0 [size=4]
    I/O ports at 0970 [size=8]
    I/O ports at 0b70 [size=4]
    I/O ports at dc00 [size=16]
    Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
    Capabilities: [44] Power Management version 2
    Capabilities: [b0] MSI: Enable- Count=1/4 Maskable- 64bit+
    Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+
    Kernel driver in use: sata_nv

00:08.1 IDE interface: NVIDIA Corporation MCP61 SATA Controller (rev a2) (prog-if 85 [Master SecO PriO])
    Subsystem: Elitegroup Computer Systems Device 2601
    Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
    I/O ports at 09e0 [size=8]
    I/O ports at 0be0 [size=4]
    I/O ports at 0960 [size=8]
    I/O ports at 0b60 [size=4]
    I/O ports at c800 [size=16]
    Memory at fe02c000 (32-bit, non-prefetchable) [size=4K]
    Capabilities: [44] Power Management version 2
    Capabilities: [b0] MSI: Enable- Count=1/4 Maskable- 64bit+
    Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+
    Kernel driver in use: sata_nv

00:09.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
    I/O behind bridge: 0000a000-0000afff
    Memory behind bridge: fde00000-fdefffff
    Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
    Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000
    Capabilities: [48] Power Management version 2
    Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
    Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
    Capabilities: [80] Express Root Port (Slot+), MSI 00
    Capabilities: [100] Virtual Channel
    Kernel driver in use: pcieport

00:0b.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
    I/O behind bridge: 00009000-00009fff
    Memory behind bridge: fdd00000-fddfffff
    Prefetchable memory behind bridge: 00000000fdc00000-00000000fdcfffff
    Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000
    Capabilities: [48] Power Management version 2
    Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
    Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
    Capabilities: [80] Express Root Port (Slot+), MSI 00
    Capabilities: [100] Virtual Channel
    Kernel driver in use: pcieport

00:0c.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
    I/O behind bridge: 00008000-00008fff
    Memory behind bridge: fdb00000-fdbfffff
    Prefetchable memory behind bridge: 00000000fda00000-00000000fdafffff
    Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000
    Capabilities: [48] Power Management version 2
    Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
    Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
    Capabilities: [80] Express Root Port (Slot+), MSI 00
    Capabilities: [100] Virtual Channel
    Kernel driver in use: pcieport

00:0d.0 VGA compatible controller: NVIDIA Corporation C61 [GeForce 6150SE nForce 430] (rev a2) (prog-if 00 [VGA controller])
    Subsystem: Elitegroup Computer Systems Device 2601
    Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
    Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
    Memory at d0000000 (64-bit, prefetchable) [size=256M]
    Memory at fc000000 (64-bit, non-prefetchable) [size=16M]
    [virtual] Expansion ROM at c0000000 [disabled] [size=128K]
    Capabilities: [48] Power Management version 2
    Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
    Kernel driver in use: nouveau

00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
    Flags: fast devsel
    Capabilities: [80] HyperTransport: Host or Secondary Interface

00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
    Flags: fast devsel

00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
    Flags: fast devsel

00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
    Flags: fast devsel
    Capabilities: [f0] Secure device <?>
    Kernel driver in use: k8temp

01:06.0 Communication controller: LSI Corporation Lucent V.92 Data/Fax Modem
    Subsystem: LSI Corporation Device 0621
    Flags: bus master, medium devsel, latency 0, IRQ 10
    I/O ports at bc00 [size=256]
    Capabilities: [f8] Power Management version 3

01:09.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI])
    Subsystem: Elitegroup Computer Systems Device 8024
    Flags: bus master, medium devsel, latency 64, IRQ 19
    Memory at fdfff000 (32-bit, non-prefetchable) [size=2K]
    Memory at fdff8000 (32-bit, non-prefetchable) [size=16K]
    Capabilities: [44] Power Management version 2
    Kernel driver in use: firewire_ohci

02:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Cedar PRO [Radeon HD 5450/6350] (prog-if 00 [VGA controller])
    Subsystem: PC Partner Limited Device e164
    Flags: fast devsel, IRQ 10
    Memory at e0000000 (64-bit, prefetchable) [disabled] [size=256M]
    Memory at fdec0000 (64-bit, non-prefetchable) [disabled] [size=128K]
    I/O ports at ac00 [disabled] [size=256]
    [virtual] Expansion ROM at fde00000 [disabled] [size=128K]
    Capabilities: [50] Power Management version 3
    Capabilities: [58] Express Legacy Endpoint, MSI 00
    Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
    Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
    Capabilities: [150] Advanced Error Reporting

02:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Cedar HDMI Audio [Radeon HD 5400/6300 Series]
    Subsystem: PC Partner Limited Device aa68
    Flags: bus master, fast devsel, latency 0, IRQ 44
    Memory at fdefc000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: [50] Power Management version 3
    Capabilities: [58] Express Legacy Endpoint, MSI 00
    Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
    Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
    Capabilities: [150] Advanced Error Reporting
    Kernel driver in use: snd_hda_intel

03:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8039 PCI-E Fast Ethernet Controller (rev 14)
    Subsystem: Elitegroup Computer Systems Device 8039
    Flags: bus master, fast devsel, latency 0, IRQ 43
    Memory at fddfc000 (64-bit, non-prefetchable) [size=16K]
    I/O ports at 9c00 [size=256]
    Capabilities: [48] Power Management version 2
    Capabilities: [50] Vital Product Data
    Capabilities: [5c] MSI: Enable+ Count=1/2 Maskable- 64bit+
    Capabilities: [e0] Express Legacy Endpoint, MSI 00
    Capabilities: [100] Advanced Error Reporting
    Kernel driver in use: sky2

まだ編集中:apt-get install for all say up to date:xser​​ver-xorg-video-ATI xserver-xorg-video-radeon xserver-xorg-video-nouveau

例:

[email protected]:/etc/X11# apt-get install xserver-xorg-video-ATI
Reading package lists... Done
Building dependency tree       
Reading state information... Done
xserver-xorg-video-ATI is already the newest version.
xserver-xorg-video-ATI set to manually installed.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
1
PMV

デュアルスクリーンを処理するために、xrandrでオープンソースのnvidiaドライバーを個人的に使用しています。

唯一の構成は私の.xinitrcにあります:

xrandr --output DVI-0 -s 3840x1080
xrandr --output DVI-0 --mode 1920x1080
xrandr --output DVI-1 --mode 1920x1080
xrandr --output DVI-0 --left-of DVI-1

セットアップに合うように、おそらくいくつかの変更があります。

[〜#〜]編集[〜#〜]

ホームディレクトリには、。xinitrcファイルがあります。このファイルは、startxコマンドまたはslimのような接続マネージャーによって読み取られます。

使用している接続マネージャーはわかりませんが、startxコマンドを使用していると仮定すると、を編集する必要があります。 .xinitrcファイルを作成し、xfce4を開始する前に前の行を追加します。

Xfce4を実行しているarchlinuxボックスにある.xinitrcファイルの例:

# ~/.xinitrc
#!/bin/bash

xrandr --output DVI-0 -s 3840x1080
xrandr --output DVI-0 --mode 1920x1080
xrandr --output DVI-1 --mode 1920x1080
xrandr --output DVI-0 --left-of DVI-1

exec startxfce4
3
Just1602